This is a Waveshare 1.3 Inch OLED Display (B) module. It is a very high-contrast display with no backlight. It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32.
Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface.
1.GND: Power ground
2.VCC: Power positive
3.SCL: Serial Clock Line
4.SDA: Serial Data wire.
| Driver Chip | SH1106 |
| Interface | 3-wire SPI, 4-wire SPI, I2C |
| Resolution | 128 x 64 |
| Display Size | 1.3 Inch |
| Colors | Blue |
| Visible Angle | >160 |
| Operating Temperature () | -30~70 |
| Storage Temperature() | -30~80 |
| Operating Voltage | 3.3V / 5V |
| Length (mm) | 40.5 |
| Width (mm) | 37.5 |
| Height (mm) | 3 |
| Weight (gm) | 5 |
2.44 cm (0.96 inch) OLED Display Module is a precise small, White OLED module which can be interfaced with any microcontroller using SPI protocol. It is having a resolution of 128×64. The package includes display board, display, 6 pin male header.
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
It can be used with either an spi interface – selectable by soldering two jumpers on the again. The design is completely 5v-geared up, with an onboard regulator and constructed in raise converter. It’s easier than ever to connect immediately for your 3v or 5v microcontroller without having any type of stage shifter.
OLEDs are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCDs and LEDs.
The most attractive thing about using the OLED displays is that they do not need a back-light like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to glow when stimulated by a current or an electric field. Best energy saving displays ever!!!
This 1.3 Inch 128×64 OLED Display Screen Module offers 128×64 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors.
This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through SPI interface.
The 1.3 Inch 128×64 OLED Display Screen Module produces blue text on black background with very good contrast when supplied with DC 2.8V supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160.
This 0.91 I2C OLED Display is an OLED monochrome 12832 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. The driver IC is SSD1306 with the I2C interface. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3V-5V microcontroller, such as Arduino.
There are no reviews yet.