Pin Connection with Node MCU:
- Connect G to a GND port of your NodeMCU
- Connect + to a 3.3v port of your NodeMCU
- Connect S to a digital port on your NodeMCU (in my example port D3)
- Connect L to a digital port on your NodeMCU (in my example port D5)
Arduino, Modules
KY-027 Magic Cup Tilt Switch Module Compatible with Arduino and Nodemcu
Magic Light Cup Module is a board which has a led and a mercury tilt switch. Using PWM to drive the LEDs on the module you can achieve the effect of light being magically transferred from one module to the other when tilting them. In short, its 2 components combined, a mercury tilt switch and a led. On tilting the module mercury inside small tube connect the switching point and make switch ON while tilting it to other side move the mercury and it disconnects the circuit and switch get OFF. The module operates on 5V DC supply.
So the magic in the name of this module is because when you tilt the switch, the led will turn on and off. And Of course, it is also possible to connect it to the NodeMCU.
Related products
-
Arduino, Arduino Shield's
CNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Arduino, Arduino Shield'sCNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor drive module which can drive 1 stepper motor each. Controlling each step stepper motor requires only two IO pins on the Arduino. Just insert this Arduino CNC Shield V3.0 onto an Arduino UNO, and install the GRBL firmware, you can then quickly build a DIY CNC engraving machine.
SKU: n/a -
Accessories, Arduino
Transparent Acrylic Glossy Case Enclosure Box For Uno R3
Transparent Acrylic Glossy Case Enclosure Box For Uno R3 is of high-grade acrylic, which provides excellent protection. This is unique design provides easy connection to other components. The dimension of enclosure box is the same as original Uno R3.
SKU: n/a -
Arduino, Arduino Development Board's
Pro Mini – ATMEGA 328P – 5V 16Mhz – Compatible Board
This is Pro Mini 5V/16MHz is a 5V running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors.
It’s a great board that will get you up and running quickly. The Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.
The Pro Mini is a micro-controller board base on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.
A six pin header can be connected to an FTDI cable to provide USB power and communication to the board. The Pro Mini is intended for semi-permanent installation in objects or exhibitions. The pin layout is compatible with the Mini.
SKU: n/a
