Features:
- This is 38KHz Infrared IR transmitter sensor module For Arduino
- Transmit 38KHz modulating signal
- Suitable for Arduino DIY project
- Material: PCB
Arduino, Modules
KY-005 38KHz Infrared IR Transmitter Sensor Module
Infrared transmitting tube, also known as an infrared light-emitting diode, as part of the diode. It is can convert electrical energy directly into the near-infrared. Light (not visible) and the radiation out of the light-emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuits. Infrared transmitting tube structure, the principle of similar to an ordinary light-emitting diode, just use different semiconductor materials. Infrared LEDs are typically used gallium arsenide (GaAs), aluminum gallium arsenic (GaAlAs), and other materials, the use of transparent or light blue, black resin encapsulation.
Related products
-
Arduino, Arduino Development Board's
Pro Mini – ATMEGA 328P – 5V 16Mhz – Compatible Board
This is Pro Mini 5V/16MHz is a 5V running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors.
It’s a great board that will get you up and running quickly. The Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.
The Pro Mini is a micro-controller board base on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.
A six pin header can be connected to an FTDI cable to provide USB power and communication to the board. The Pro Mini is intended for semi-permanent installation in objects or exhibitions. The pin layout is compatible with the Mini.
SKU: n/a -
Arduino, Arduino Development Board's
Mega WiFi R3 Atmega2560 NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Mega
Arduino, Arduino Development Board'sMega WiFi R3 Atmega2560 NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Mega
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Mega is Full integration on one board Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb.
All of the modules can work together or separately. And everyone has their own pinout headers. The convenient solution for the development of new projects requiring Uno and WiFi. Via USB you can update sketches and firmware for ATmega328 and for ESP8266.
It is a customized version of the classic MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
For this onboard have the USB-serial converter CH340G. Use this board is very simple. The board has DIP-switch, to connect the modules. For example, to USB and ATmeg2560, USB and ESP8266, ATmega2560 and ESP8266.
SKU: n/a -
Arduino, Arduino Shield's
16 Channel PWM Servo Driver Module Shield
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! Here is the Servo Driver Module Shield 16 Channel to help you out!!!
What now? You could give up OR you could just get our handy PWM and Servo driver shield. Its now Arduino-ready and works with any Arduino that uses shields: Uno, Mega, ADK, its all good.
SKU: n/a -
Arduino, Display
3.5 inch TFT LCD Touch Screen Display Shield for Arduino Uno
This small 3.5-inch touch screen module is designed specially for Arduino UNO. This is ideal for DIY anywhere, anytime, and does not require any separate power source or case to hold it. The screen also comes with a stylus to interact with the small screen.
Features of 3.5 inch TFT LCD Touch Screen Display Shield for Arduino Uno:-
- Resistive touch screen TFT LCD, 3.5inch, 480×320 resolution
- Standard Arduino interface, compatible with development boards like Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO
- Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
- PWM backlight control allows adjusting the backlight to a comfortable level
- Micro SD slot, provides an easy way to store photos for displaying
- Controlled via SPI, only a few Arduino pins are used
- Comes with STM32 and Arduino examples, convenient for porting
SKU: n/a
