The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly,it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value).
The working of Solenoid Valve is similar to that of a normal valve. The only difference here is that the Solenoid Valve only operates when it is supplied with DC Voltage.
This is a 2 way Solenoid Valve. So, it has has 2 connections, one of them is liquid inlet and other is outlet. It accepts DC voltage of 24V. It also works on 12V DC. When there is input voltage on the Solenoid Terminals, it operates, and opens up, allowing the liquid to flow from inlet to outlet.
The Solenoid has push fit connectors on each side. So, this connector will allow us to directly push the pipe or nozzle into the solenoid without worrying of leaking.
DC 24V P60/60 Large Suction 100 KG Lifting Solenoid Electromagnet consist of an iron core and a coil to attract magnetic substances, using the magnetic action induced by electric current, only while the current is applied. This compact functional device offers high power with high reliability. The structure and design to release the residual magnetism left after de-energization is also one of its unique features.
An electromagnet is simply a coil of wire. It is usually wound around an iron core. However, it could be wound around an air core, in which case it is called a solenoid. When connected to a DC voltage or current source, the electromagnet becomes energized, creating a magnetic field just like a permanent magnet. The magnetic flux density is proportional to the magnitude of the current flowing in the wire of the electromagnet.
The polarity of the electromagnet is determined by the direction of the current. The north pole of the electromagnet is determined by using your right hand. Wrap your fingers around the coil in the same direction as the current is flowing (conventional current flows from + to -). The direction your thumb is pointing is the direction of the magnetic field, so north would come out of the electromagnet in the direction of your thumb. DC electromagnets are principally used to pick up or hold objects
Applications: Applied to the cabinet lock, locker locks, file cabinet locks, luggage locks, electric locks, door locks, solenoid locks, drawer, newspaper boxes lock, sauna lock, locker electromagnetic locks, electric locks, newspaper boxes, sauna Electronics lock
12V DC Solenoid Water Air Valve Switch (Normally Closed) 1/2 controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
There are no reviews yet.