Features:
- 5 channel high sensitivity sensor
- High accuracy for tracking black line.
- Distance sensor at the front, distance can be adjusted
- Special touch sensor design, making the robot design simple
- Digital output signal
- Indicator LEDs
Arduino, Modules
BFD-1000 Five Channel Infrared Tracking Sensor Module
BFD-1000 Five Channel Infrared Tracking Sensor Module is a sensor board designed for use with line follower robots. This module has been sufficient to meet the day-to-day task of tracking, but also with the infrared distance sensor and touch detection sensor, the board makes your robot design able to adapt to the situation easily.
BFD 1000 specifically designed as a black line (white) XunQu, especially suitable for the complex of black and white line, cross black and white line detection, it has 6 roads high sensitivity infrared sensor (5 escapes patrol, 1 road), to the recognition of black and white line accurately, it has the following functions and features:-
1. BFD 1000 integrated no.5 high sensitivity tracking sensor, for the environmental impact of small, can accurate tracking to complex black line (white line), for the simple black line tracking more comfortable.
2. BFD 1000 integrated infrared Barrie sensor, escapes distance can be regulated through the slide rheostat.
3. BFD 1000 has a specially designed touch detection sensor, from the design of the robot is more simple.
4. BFD 1000 all of the output signal to a digital signal (v), conveniently connected with MCU.
5. All sensor output state BFD 1000 have LED lights as instructions, convenient debugging.
6. BFD 1000 support voltage of 3.0-5.5 v meet the demand of most systems.
7. Using the high sensitivity of the sensor, tracking range between 0.5 mm to 40 mm any change and dont need to do any adjustment.
Related products
-
Arduino, Arduino Shield's
L293D Motor Driver Shield for Arduino
Features of L293D Motor Driver Shield for Arduino:-
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
SKU: n/a -
Accessories, Arduino
Transparent Acrylic Glossy Case Enclosure Box For Uno R3
Transparent Acrylic Glossy Case Enclosure Box For Uno R3 is of high-grade acrylic, which provides excellent protection. This is unique design provides easy connection to other components. The dimension of enclosure box is the same as original Uno R3.
SKU: n/a -
Arduino, Arduino Development Board's
NANO V3.0 Development Board – Clone Compatible Model
NANO Version 3 is the open source smallest Embedded Development board based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
SKU: n/a -
Arduino, Display
2.4 Inch Touch Screen TFT Display Shield for Arduino UNO Mega
2.4 Inch Touch Screen TFT Display Shield adds a touch up to your Arduino project with a beautiful large touchscreen display shield with built-in micro SD card connection. This TFT display is big (2.4 diagonal) bright and colorful! 240320 pixels with individual pixel control. It has way more resolution than a black and white 12864 display.
SKU: n/a
