This is Magnetic Mount Antenna having a frequency of 2400 2483 MHz and gain of 3 dBi. This is very helpful for signal boosting. Magnetic mount antennas are commonly used for car and truck applications. The antennas magnetic base sticks securely to the metal of the vehicle. The metal surface of the car acts as a ground plane to bounce the signal. Since magnetic mount antennas require a ground plane, they should be mounted on metal.
Application: 2.4 GHz Applications, Smart Meters
| Frequency (MHz) | 2400 2500 MHz |
| Gain | 3 dBi |
| Impedance () | 50 |
| VSWR | < 2.0 |
| Polarization | Linear |
| Power Handling (W) | 10 |
| HPBW | H: 3600; V: 400 |
| Operational Temperature | -30 to 60 C |
| Humidity | 5 95% |
| Housing | Aluminum- Commercial Grade |
| Dimension (mm) | 50 x 32 |
| Weight( g ) | 50 |
| Cable Length (Meter) | 3 |
This GPS/GLONASS GNSS Antenna is designed for applications that require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space-restricted environments. With 3-meter long cable, one can use this antenna to enhance the GPS Signals in an indoor project with GPS and GSM modules as well as Raspberry Pi HAT or Arduino Shield.The Antenna has a flat magnetic surface to keep it steady at one place temporarily, or it can permanently stick to any surface with helpof Double Sided Tape
A high gain wide-band patch antenna on an integral ground delivers reliable performance. A fully IP67 waterproof rated and UV resistant enclosure allows use in outdoor environments. Mid SAW filter configuration eliminates potential. LNA burn-out from nearby out of band radiated power bursts from other antennas that may be co-located nearby. The antenna is manufactured to strict first-tier Automotive-quality controlled the manufacturing process.
This is PCB Antenna having a frequency of 24002500 MHz and 3 dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.
There are no reviews yet.