Features of 1/4 inch SEN-HZ41WC Brass Water Flow Sensor:-
- Water quality requirement: Drinking water health standards, 0～80℃
- Flow range: 0.35 ～ 3.0 Liter/min
- Withstand hydraulic pressure: ≤1.75 MPa
- Voltage/electric current: DC 4.5 ～ 18 Volt, ≤15mA
- Insulation resistance: >100MΩ
- Electrical strength: AC500V, 50HZ
- Output level: Rated voltage DC5V, high level ≥4.5 Volt, low level ≤0.5 Volt
- Pulse duty cycle: 50%
- Flow characteristic: F=73Q, F:HZ, Q:L/min，±10%
- Cumulative flow conversion: 1 Liter water=1780 pulse, accuracy: 8%
Applications:-
- Widely used in water industrial field, such as thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.
Note:-
- When magnetic material is close with the sensor, its characteristics may vary.
- In order to avoid particle debris, the sensor must be installed after a filter.
- The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor’s measurement accuracy.
