Robotics
Showing 76–90 of 94 resultsSorted by latest
-
Motor Driver Boards and Modules, Stepper Motor Drivers
A3967 Stepper Motor Driver Module
A3967 Stepper Motor Driver For Arduino is the latest version of EasyDriver v4.4. It provides greater flexibility and control over your stepper motor compared to the older versions.
It is a simple to use stepper motor driver, compatible with most microcontrollers that can output a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The module requires a 7V to the 30V power supply for a motor. The module has an onboard voltage regulator for the digital interface that can be set to 5V or 3.3V.
Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors and motors wired as bi-polar. i.e. 4, 6 or 8 wire stepper motors. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the micro-stepping resolution. The sleep and enable pins are also broken out for further control.
The A3967 is a complete microstepping motor driver with builtin translator. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capability of 30 V and ±750 mA. The A3967 includes a fixed off-time current regulator that has the ability to operate in slow, fast, or mixed current-decay modes. This current-decay control scheme results in reduced audible motor noise, increased step accuracy, and reduced power dissipation.
The translator is the key to the easy implementation of the A3967. By simply inputting one pulse on the STEP input the motor will take one step (full, half, quarter, or eighth depending on two logic inputs). There are no phase-sequence tables, highfrequency control lines, or complex interfaces to program. The A3967 interface is an ideal fit for applications where a complex μP is unavailable or over-burdened.
Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO) and crossovercurrent protection. Special power-up sequencing is not required. The A3967 is supplied in a 24-pin SOIC, which is lead (Pb) free with 100% matte tin leadframe plating. Four pins are fused internally for enhanced thermal dissipation. The pins are at ground potential and need no insulation.
SKU: n/a -
Motor Driver Boards and Modules, Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 4A 9-42V TTL 16 Micro-Step CNC 1 Axis
Motor Driver Boards and Modules, Stepper Motor DriversTB6600 Stepper Motor Driver Controller 4A 9-42V TTL 16 Micro-Step CNC 1 Axis
TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.
TB6600Arduino stepper motor driver has a wide range of power input, 9-42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. The stepper driver supports speed and direction control.
You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis Upgraded Version of the 42/57/86 Stepper Motor segment increased to 32 segments, suitable for high subdivision applications. Suitable for step motor :57, 42, 86Type 4 phase 2 phase (4 line 6 line 8).
SKU: n/a -
Motor Driver Boards and Modules, Stepper Motor Drivers
DRV8833 2 Channel DC Motor Driver
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The board ships populated with SMD components, including the DRV8833, and adds an FET for reverse battery protection.
The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in current-limiting, and no need for externally supplied logic voltage.
SKU: n/a -
Motor Driver Boards and Modules, Stepper Motor Drivers
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Motor Driver Boards and Modules, Stepper Motor DriversDouble BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.
Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs; diagnosis with current sense, slew rate adjustment; dead time generation and protection against overtemperature, overvoltage, under voltage; overcurrent, and short circuit.
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module provides; a cost-optimized solution for protected high current PWM motor drives with very low board space consumption.SKU: n/a -
Motor Driver Boards and Modules, Stepper Motor Drivers
3D printing wireless router ESP8266 WIFI module MKS Robin-WIFI V1.0 APP remote control for MKS Robin mainboard high stability
Motor Driver Boards and Modules, Stepper Motor Drivers3D printing wireless router ESP8266 WIFI module MKS Robin-WIFI V1.0 APP remote control for MKS Robin mainboard high stability
This ESP8266 WIFI module is capable of a high transmission rate and stability . And, it is compatible greatly with the MKS Robin mainboard. It not only supports document transfer via APP but also supports Cloud printing and firmware upgrading.
SKU: n/a -
Linear Motor / Actuator, Motor
12V 300MM Stroke Length Linear Actuator 7mm/S 1500N
This Miniature Linear Actuator Stroke Length 300MM,7mm/S,1500N,12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push rod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of drive motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, shell, micro motion control switch, etc.SKU: n/a -
Linear Motor / Actuator, Motor
12V 200MM Stroke Length Linear Actuator 7mm/S 1500N
This Miniature Linear Actuator Stroke Length 200MM,7mm/S,1500N,12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push rod. It can be used in various simple or complex process. This electric push rod is a kind of electric driving device as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of drive motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, shell, micro motion control switch, etc.
SKU: n/a -
BLDC Motor, Motor
A2212 – 2200KV BLDC Brushless Motor
A2212 is a brushless outrunner DC motor specifically made to power Quadcopters and Multirotors. It is a 2200kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters.
Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.
SKU: n/a -
BLDC Motor, Motor
A2212 – 1800KV BLDC Brushless Motor
A2212 is a brushless outrunner dc motor specifically made to power Quadcopters and Multirotors. It is a 1800kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters.
Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.
SKU: n/a -
BLDC Motor, Motor
A2212 – 1400KV BLDC Brushless Motor
A2212 is a brushless outrunner dc motor specifically made to power Quadcopters and Multirotors. It is a 1400kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters.
Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.
SKU: n/a -
BLDC Motor, Motor
A2212 – 1000KV BLDC Brushless Motor
This is a A2212 brushless outrunner motor specifically made to power Quadcopters and Multirotors. It is a 1000kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. With out 3S LiPo battery, our 30A ESC and our high efficiency 10″ propellers these motors provide upto 800gms. Using 4 of these motors on a quadcopter with our propellers will give you a total of 3.2 kg thrust! Use this to build powerful and efficient quadcopters.
Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.
SKU: n/a -
Robot Parts
200 RPM Dual Shaft BO Motor – Straight
The 200 RPM Dual Shaft BO Motor – Straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors.
It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
SKU: n/a -
Robot Parts
2 Wheel Smart Car Robot Chassis Kit
This is 2 wheel smart car robot chassis DIY kit. It comes with the 2 pairs of BO Motors and Wheels. All the products included in this car kit are quality products. The chassis used in this kit is transparent so as to create dynamic handling of the components mounted on your robotic vehicle.
SKU: n/a -
Robot Parts
2 Motor Metal Sheet Pressed Robot Chassis
A chassis consists of an internal vehicle frame that supports an artificial object in its construction and use, can also provide protection for some internal parts. An example of a chassis is the underpart of a motor vehicle, consisting of the frame (on which the body is mounted).
In an electronic device, the chassis consists of a frame or other internal supporting structure on which the circuit boards and other electronics are mounted.
2 Motor Metal Sheet Pressed Robot Chassis
In some designs, such as older sets, one can mount a chaste inside a heavy, rigid cabinet, while in other designs such as modern computer cases, one can attach lightweight covers or panels to the chassis. The combination of chassis and outer covering is famous as an enclosure.
Sheet Metal Pressed Robotic Chassis Very easy to use with Good Gauge Sheet. It is ready to Fix Motors, PCB Boards and Castor Wheel for Frontside fit
Chassis makes easy to make a car robot.
SKU: n/a -
Robot Parts
150 RPM Single Shaft L- Shaped BO Motor
The 150 RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors.
It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
SKU: n/a
