Robotics
Showing 46–60 of 84 results
-
Servo Motor
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (360 Degree Rotation)
This Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (360 Degree Rotation)features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock- roofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec.
SKU: n/a -
Servo Motor
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)
This Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock- roofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec.
SKU: n/a -
Servo Motor
Tower Pro MG995 Metal Gear Servo Motor (360 Degree Rotation)
TowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor is a high-speed standard servo can rotate 360 degrees. You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.
The optimized performance and reliability of this servo have made it the favorite choice of many RC hobbyists.It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.This TowerPro SG90 Continuous Rotation 360 Degree Servo Motor is special among all the available servo motors because its operation is very different from that of a standard servo. As instead of going to a specified angle, this servo will be static at a 1.5ms pulse, a longer pulse gives forward rotation and a shorter pulse give backward rotation.They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.SKU: n/a -
Servo Motor
Tower Pro MG995 Metal Gear Servo Motor (180 Degree Rotation)
MG995 Metal Gear Servo Motor is a high-speed standard servo can rotate approximately 180 degrees (60 in each direction) used for airplane, helicopter, RC-cars and many RC model. Provides 10kg/cm at 4.8V, and 12kgcm at 6V.
It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.
They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.
SKU: n/a -
Servo Motor
Tower Pro MG90S Metal Gear Servo Motor (180 Degree Rotation)
The Tower pro MG90S Mini Digital Servo is 180° rotation servo. It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.
The good optimized performance and reliability of our servos have made them the favorite choice of many RC hobbyists.
They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.
SKU: n/a -
Servo Motor
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control
The Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servos or ESC. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode makes the servo go back to the neutral point. The Automatic Window Wiper Mode makes the servo swing like a window wiper in the largest angle possible.
SKU: n/a -
Servo Motor
Tower Pro MG958 Digital High Torque Metal Gear Servo Motor
The MG958 High Torque Digital Metal Gear Servo is the best choice if you need higher torque than 15KG. It provides an excellent performance for RC-cars from 10 to 6 scale truggy monster and 30cc 60cc airplanes. Its shaft is upgraded to aluminum 6061-T6. It is stronger and lighter than copper. The product configure table is provided in the attachments. Please refer to it to get more information regd. the dimensions of the product.
SKU: n/a -
Servo Motor
Tower Pro MG946R Digital High Torque Metal Gear Servo Motor
MG946R Metal Gear Digital High Torque Servo is an upgraded version of Tower Pro MG945. Its new PCB and IC control system which makes it more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering. MG946R is for 1/8 buggy monster and many RC model. The product configure table is provided in the attachments.
SKU: n/a -
Servo Motor
Tower Pro MG90S Metal Gear Servo Motor (360 Degree Rotation)
The Tower pro MG90S Micro Digital Servo is 360 rotation servo. It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.
The good optimized performance and reliability of our servos have made them the favorite choice of many RC hobbyists.
They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.
SKU: n/a -
Generic Pumps, Pumps
Submersible Mini Water Pump – 3-6V DC
Micro DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project. This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.
SKU: n/a -
Generic Pumps, Pumps
Ultra-Quiet DC 12V 3M 240L/H Brushless Submersible Water Pump
This Ultra-Quiet DC 12V 3M 240L/H Brushless Submersible Water Pump is a low cost, small size Submersible Pump. It can take up to 240 litres per hour with a very low current consumption from 300mA. Just connect tube pipe to the motor outlet, submerge it in water, and power it.
This black colour pump comes with heavy-duty cable and 5mm DC female jack at the end to connect directly to the 12V power supply. It is widely used in prototype projects as well as in decoration purposes. The pump has a long cord up to 160cm and mounting bracket. Maximum height of pumping is 300 cm.
SKU: n/a
