Robotics
Showing 16–30 of 94 resultsSorted by latest
-
GPS Module and Antenna
1575 Mhz GPS Antenna for GPS and GSM module with 3 Meter Cable-Good Quality
This GPS/GLONASS GNSS Antenna is designed for applications that require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space-restricted environments. With 3-meter long cable, one can use this antenna to enhance the GPS Signals in an indoor project with GPS and GSM modules as well as Raspberry Pi HAT or Arduino Shield.The Antenna has a flat magnetic surface to keep it steady at one place temporarily, or it can permanently stick to any surface with helpof Double Sided Tape
A high gain wide-band patch antenna on an integral ground delivers reliable performance. A fully IP67 waterproof rated and UV resistant enclosure allows use in outdoor environments. Mid SAW filter configuration eliminates potential. LNA burn-out from nearby out of band radiated power bursts from other antennas that may be co-located nearby. The antenna is manufactured to strict first-tier Automotive-quality controlled the manufacturing process.
SKU: n/a -
Flight Controller and Accessories
KK2.1 Multi-Rotor LCD Flight Controller Board
The KK2.1 is next big evolution of the first generation KK flight control boards. The KK2.1 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!
The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
The KK2.1 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.
If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.
SKU: n/a -
Flight Controller and Accessories
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot
Picking the right flight controller that suits your needs is always a daunting task Don’t worry we is here to assist you to get a quality product. Buy this Pixhawk 2.4.8 32 Bit PX4 Autopilot flight controller for your drone application. what are you have to do is just check its a specification.
The most common question asked by our community is what is flight controller and the answer is here The flight controller (aka FC) is the brain of the Drone(Quadcopter). Its a circuit board with a range of sensors that detect movement of the drone, as well as user commands so Pixhawk 2.4.8 does. Using this data, it then controls the speed of the motors to make the craft move as instructed.
It Supports 8 RC channel with 4 serial port. Various user interfaces are available for programing, reviewing logs, even some apps for smartphones & tablets. It detects and configures all its peripherals automatically
The benefits of the Pixhawk system include a Unix/Linux-like programming environment, completely new autopilot functions. Sophisticated scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes.SKU: n/a -
Flight Controller and Accessories
APM 2.8 Flight Controller with Built-in Compass
APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5, 2.6; for FPV RC Drone. The sensors are exactly the same as the APM 2.6 flight controller; however, the module has the option to use an external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.
The APM 2.8 Multicopter Flight Controller is a complete open source autopilot system. This is the best selling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary-wing. In addition, it turns multirotor vehicle (even cars and boats) into a fully autonomous vehicle. meanwhile, it is capable of performing programmed GPS missions with waypoints.
SKU: n/a -
Flight Controller and Accessories
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
his is universal Glass Fiber Flight Controller Anti-vibration Set Shock Absorber APM/KK/MWC/PixHawk vibration damping mount has a list of useful applications, This provides the free camera mounting to Flight controller isolation.
It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment.
The rectangle mount can be used on a number of Flight controllers, such as APM Pixhawk as well as the Mobius camera or even a GoPro turned sideways. And comes with some additional mounting tape.
Suite for different open source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4 etc.
SKU: n/a -
ESC - Drone Speed Controller
30A BLDC ESC – Brushless Motor Speed Controller
30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs.
30A BLDC ESC ELECTRONIC SPEED CONTROLLER can drive motors which consume up to 30A current. It works on 2S-3S LiPo batteries. It has an onboard BEC which provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. It can be used to control our brushless motors with a 2S-3S LiPo (make sure motor doesn’t draw more than 30A).
This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv).
SKU: n/a -
ESC - Drone Speed Controller
SimonK 30A BLDC ESC Electronic Speed Controller Without Connectors – Red Color
ESC - Drone Speed ControllerSimonK 30A BLDC ESC Electronic Speed Controller Without Connectors – Red Color
Simonk 30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.
Simonk 30A BLDC ESC Electronic Speed Controller can drive motors which consume current up to 30A. It works on 2S-3S LiPo batteries. This electronic speed controller offers a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver so no extra receiver battery is required.
This version of the ESC also includes backward-polarity protection and protection on the 5V receiver line, this means that if you accidentally attach a battery backward it wont destroy your motor controller and other BECs wont affect the ESC.
Warning:In case the BLDC ESC is connected directly to the remote control receiver, never ever switch off the remote control before switching off power to the BLDC ESC. Depending on the model of the remote control, it may result in full throttle applied to the motor and it will rotate at full speed.
SKU: n/a -
ESC - Drone Speed Controller
SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
The SimonK 30A 2-3S Brushless Electronic Speed Controller by Micron Robotics is a high-performance brushed electronic speed controller designed for RC models, drones, and quadcopters. It delivers precise motor control, enhanced thermal protection, and superior flight stability for professional-grade performance.
SKU: n/a -
ESC - Drone Speed Controller
Emax SimonK Series Multirotor 30A Brushless ESC (Original)
Emax SimonK Series Multirotor 30A Brushless ESC (Original) is a brushless dc motor speed controller. The low output resistance greatly enhances power stability, and this will improve the great battery life. Emax SimonK Series Multirotor 30A Brushless ESC is programmed to start the brushless dc motor. This ESC has a greater current handling capacity which is 30A continuous and the peak current is 40A for the last 10 seconds only.
SKU: n/a -
Drone Transmitter and Receiver
Fly Sky FS-CT6B 6-Channel 2.4 Ghz Transmitter and Receiver
FlySky CT6B 2.4Ghz 6 Channel Transmitter and Receiver(FS-R6B) Remote is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quadcopters and multicopters that require 6 channel operation.
This radio has very lightweight and handy design with two retract switches and proportional flap dials in easy reach for channels 5 and 6. It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.
This remote is comes with FS-R6B receiver which is one of the best receiver we had in the class in very reasonable cost. we received many happy and satisfactory feedback from our hobbyist buyers for the same.
It can be configured by connecting it to the computer. Use the T6 config software to configure your radio on a computer.
SKU: n/a -
Drone Transmitter and Receiver
FS-R6B FlySky 2.4Ghz 6 Channel Receiver for RC FS-CT6B TH9x
The FS-R6B Flysky 2.4ghz 6 Channel Receiver For Rc FS-CT6B TH9X Receives Signal From Compatible Transmitter.
In the world of racing of drones, the basic requirement is for small and lightweight components that will make a drone more and more nimble. This FS-R8S receiver fits these requirements superbly by being very small in size and light in weight.
It Requires 4.8-6 Volts For Working. FS-R6B Flysky 2.4ghz 6ch Receiver Has 3 Pins Which Are Vcc, Ground, And Signal. FS-R6B Flysky 2.4ghz 6ch Receiver For Rc FS-CT6B TH9X Can Be Powered Using Ubec Or 4.5-6.5v Battery.
SKU: n/a -
Drone Transmitter and Receiver
FS-iA6 6 Channel AFHDS 2A 2.4G Radio Receiver
This FS-iA6 6 Channel AFHDS 2A 2.4G Radio Receiver works great with the FlySky FS-i6 Controller.
This compact 6 channel receiver is great for any model using up to 6 channels and reliable, interference-free 2.4GHz AFHDS2A signal operation with a range exceeding 500 meters, it can be considered to be a full range for all but the most demanding of applications.
The receiver has end-on connectors to enable a neat installation in tight spaces. Dual antennas give the FS-iA6 excellent reception and interference rejection capability.
It comes with features such as Digital receiver system, Quick and extremely stable in performance and Ultra lightweight design. With easy binding, compact dimensions, and dual antennas!
We have a range of such transmitters and receivers which are can be used to fulfill your unmanned vehicle requirements.
SKU: n/a -
Drone Transmitter and Receiver
FS-i6S Remote Control 2.4G 10CH AFHDS with FS-IA10B Receiver and Mobile Holder
Drone Transmitter and ReceiverFS-i6S Remote Control 2.4G 10CH AFHDS with FS-IA10B Receiver and Mobile Holder
The FlySky FS-i6S Remote Control 2.4G 10CH AFHDS Transmitter with FS-IA10B Receiver new look design comes with some exciting new features. This radio incorporates a monochrome backlit LCD touchscreen making it easy to program and make changes in sunlight or at night.
There are two internal dual omnidirectional high gain antennas (for more reliability) built inside the frame so they cant be damaged in transit. To help control your aircraft there are lots of programmable switches, buttons and scroll wheels. Making them great for setting up flight modes and the scroll wheels could be used for controlling camera gimbals.
The Premium designed and look makes you feel the class of product and easy access to buttons in the right position and smooth operation and controls. All switches and scroll wheels are in easy reach and the adjustable length sticks can be set for comfortable use. There is a loop for attaching a neck strap and a phone/monitor holder mounting point. There is even a mini USB port for easy connection to your PC for updates or for connecting (via USB) to your favorite simulator programs.
Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation. Each transmitter hops between 16 channels in order to reduce interference from other transmitters.
With all the features theFS-i6S offers it is one of the best radios available in this price Range..!
SKU: n/a -
Drone Transmitter and Receiver
FlySky FS-iA10B Radio Receiver
Building on the previous FlySky iA6B receiver, FlySky is now providing a 10 channel version of the receiver called the FlySky FS-IA10B Radio Receiver. Like the FS-iA6B, the iA10B is capable of iBUS, SBUS, PPM and PWM for enhanced control.
The advantage of PPM / SBUS over traditional PWM channels is that you only need to use one signal wire, rather than one for each PWM channel hence for PPM compatible flight controllers such as the Naze32, the wiring is greatly simplified. Furthermore, with the optional telemetry sensors, you can expand the receivers compatibility to monitor flight battery voltage and even things like motor RPM.
This full 10 channel receiver works for most models and is considered a full range so it can handle larger models as well as the smaller ones. Dual antennas give the FS-iA10B for unparalleled reception (reported at well over 1km) and interference rejection capability. For best results, makes sure the antennas are set at a 90-degree angle from each other.
The FS-iA10B is slightly larger than the FS-iA6B (see product pic), but its still compact and it features end-on connectors to enable a neat installation in tight spaces.
SKU: n/a -
Drone Transmitter and Receiver
FLY SKY FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver
The FLY SKY FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver works great with the FlySky FS-i6 Controller.
This compact 6 channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be the full range for all but the most demanding of application. The receiver has end-on connectors to enable a neat installation in tight spaces.
This has FLY SKY FS IA6B RF 2.4GHz 6ch PPM output with iBus port receiver built in connectors which allows you to use any of the optional FlySky telemetry sensors. Dual antennas give the FS-iA6B excellent reception and interference rejection capability. With easy binding, compact dimensions, optional telemetry, and dual antennas.
SKU: n/a
